MakeItFrom.com
Menu (ESC)

SAE-AISI 1144 Steel vs. 6005A Aluminum

SAE-AISI 1144 steel belongs to the iron alloys classification, while 6005A aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 1144 steel and the bottom bar is 6005A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
69
Elongation at Break, % 11 to 17
8.6 to 17
Fatigue Strength, MPa 280 to 430
55 to 110
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 72
26
Shear Strength, MPa 460 to 510
120 to 180
Tensile Strength: Ultimate (UTS), MPa 750 to 840
190 to 300
Tensile Strength: Yield (Proof), MPa 420 to 690
100 to 270

Thermal Properties

Latent Heat of Fusion, J/g 250
410
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1450
650
Melting Onset (Solidus), °C 1410
600
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 51
180 to 190
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.2
47 to 50
Electrical Conductivity: Equal Weight (Specific), % IACS 8.2
150 to 170

Otherwise Unclassified Properties

Base Metal Price, % relative 1.9
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.4
8.3
Embodied Energy, MJ/kg 19
150
Embodied Water, L/kg 47
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 91 to 110
24 to 29
Resilience: Unit (Modulus of Resilience), kJ/m3 480 to 1290
76 to 530
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 27 to 30
20 to 30
Strength to Weight: Bending, points 23 to 25
27 to 36
Thermal Diffusivity, mm2/s 14
72 to 79
Thermal Shock Resistance, points 22 to 24
8.6 to 13

Alloy Composition

Aluminum (Al), % 0
96.5 to 99.1
Carbon (C), % 0.4 to 0.48
0
Chromium (Cr), % 0
0 to 0.3
Copper (Cu), % 0
0 to 0.3
Iron (Fe), % 97.5 to 98
0 to 0.35
Magnesium (Mg), % 0
0.4 to 0.7
Manganese (Mn), % 1.4 to 1.7
0 to 0.5
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0
0.5 to 0.9
Sulfur (S), % 0.24 to 0.33
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.2
Residuals, % 0
0 to 0.15