MakeItFrom.com
Menu (ESC)

SAE-AISI 1552 Steel vs. EN AC-44300 Aluminum

SAE-AISI 1552 steel belongs to the iron alloys classification, while EN AC-44300 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 1552 steel and the bottom bar is EN AC-44300 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 220 to 250
68
Elastic (Young's, Tensile) Modulus, GPa 190
72
Elongation at Break, % 11 to 14
1.1
Fatigue Strength, MPa 290 to 400
100
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 72
27
Tensile Strength: Ultimate (UTS), MPa 760 to 840
270
Tensile Strength: Yield (Proof), MPa 460 to 650
150

Thermal Properties

Latent Heat of Fusion, J/g 250
570
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
590
Melting Onset (Solidus), °C 1420
580
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 51
130
Thermal Expansion, µm/m-K 11
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 11
33
Electrical Conductivity: Equal Weight (Specific), % IACS 12
120

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
9.5
Density, g/cm3 7.8
2.5
Embodied Carbon, kg CO2/kg material 1.4
7.7
Embodied Energy, MJ/kg 19
140
Embodied Water, L/kg 47
1050

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 81 to 98
2.6
Resilience: Unit (Modulus of Resilience), kJ/m3 560 to 1130
150
Stiffness to Weight: Axial, points 13
16
Stiffness to Weight: Bending, points 24
55
Strength to Weight: Axial, points 27 to 30
29
Strength to Weight: Bending, points 24 to 25
36
Thermal Diffusivity, mm2/s 14
58
Thermal Shock Resistance, points 26 to 29
13

Alloy Composition

Aluminum (Al), % 0
84.3 to 89.5
Carbon (C), % 0.47 to 0.55
0
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 97.9 to 98.3
0 to 1.0
Manganese (Mn), % 1.2 to 1.5
0 to 0.55
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0
10.5 to 13.5
Sulfur (S), % 0 to 0.050
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.25