SAE-AISI 6150 Steel vs. AISI 201LN Stainless Steel
Both SAE-AISI 6150 steel and AISI 201LN stainless steel are iron alloys. They have 73% of their average alloy composition in common. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown.
For each property being compared, the top bar is SAE-AISI 6150 steel and the bottom bar is AISI 201LN stainless steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 200 to 350 | |
210 to 320 |
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
200 |
Elongation at Break, % | 15 to 23 | |
25 to 51 |
Fatigue Strength, MPa | 300 to 750 | |
340 to 540 |
Poisson's Ratio | 0.29 | |
0.28 |
Shear Modulus, GPa | 73 | |
77 |
Shear Strength, MPa | 400 to 730 | |
530 to 680 |
Tensile Strength: Ultimate (UTS), MPa | 630 to 1200 | |
740 to 1060 |
Tensile Strength: Yield (Proof), MPa | 420 to 1160 | |
350 to 770 |
Thermal Properties
Latent Heat of Fusion, J/g | 250 | |
280 |
Maximum Temperature: Mechanical, °C | 420 | |
880 |
Melting Completion (Liquidus), °C | 1460 | |
1410 |
Melting Onset (Solidus), °C | 1410 | |
1370 |
Specific Heat Capacity, J/kg-K | 470 | |
480 |
Thermal Conductivity, W/m-K | 46 | |
15 |
Thermal Expansion, µm/m-K | 12 to 13 | |
17 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.3 | |
2.4 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.4 | |
2.9 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 2.3 | |
12 |
Density, g/cm3 | 7.8 | |
7.7 |
Embodied Carbon, kg CO2/kg material | 2.0 | |
2.6 |
Embodied Energy, MJ/kg | 28 | |
38 |
Embodied Water, L/kg | 51 | |
140 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 130 to 180 | |
230 to 310 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 460 to 3590 | |
310 to 1520 |
Stiffness to Weight: Axial, points | 13 | |
14 |
Stiffness to Weight: Bending, points | 24 | |
25 |
Strength to Weight: Axial, points | 22 to 43 | |
27 to 38 |
Strength to Weight: Bending, points | 21 to 32 | |
24 to 30 |
Thermal Diffusivity, mm2/s | 13 | |
4.0 |
Thermal Shock Resistance, points | 20 to 38 | |
16 to 23 |
Alloy Composition
Carbon (C), % | 0.48 to 0.53 | |
0 to 0.030 |
Chromium (Cr), % | 0.8 to 1.1 | |
16 to 17.5 |
Copper (Cu), % | 0 | |
0 to 1.0 |
Iron (Fe), % | 96.7 to 97.7 | |
67.9 to 73.5 |
Manganese (Mn), % | 0.7 to 0.9 | |
6.4 to 7.5 |
Nickel (Ni), % | 0 | |
4.0 to 5.0 |
Nitrogen (N), % | 0 | |
0.1 to 0.25 |
Phosphorus (P), % | 0 to 0.035 | |
0 to 0.045 |
Silicon (Si), % | 0.15 to 0.35 | |
0 to 0.75 |
Sulfur (S), % | 0 to 0.040 | |
0 to 0.015 |
Vanadium (V), % | 0.15 to 0.3 | |
0 |