SAE-AISI 8645 Steel vs. A390.0 Aluminum
SAE-AISI 8645 steel belongs to the iron alloys classification, while A390.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is SAE-AISI 8645 steel and the bottom bar is A390.0 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 180 to 200 | |
110 to 140 |
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
75 |
Elongation at Break, % | 12 to 23 | |
0.87 to 0.91 |
Fatigue Strength, MPa | 280 to 350 | |
70 to 100 |
Poisson's Ratio | 0.29 | |
0.33 |
Shear Modulus, GPa | 73 | |
28 |
Tensile Strength: Ultimate (UTS), MPa | 600 to 670 | |
190 to 290 |
Tensile Strength: Yield (Proof), MPa | 390 to 560 | |
190 to 290 |
Thermal Properties
Latent Heat of Fusion, J/g | 250 | |
640 |
Maximum Temperature: Mechanical, °C | 410 | |
170 |
Melting Completion (Liquidus), °C | 1460 | |
580 |
Melting Onset (Solidus), °C | 1420 | |
480 |
Specific Heat Capacity, J/kg-K | 470 | |
880 |
Thermal Conductivity, W/m-K | 39 | |
130 |
Thermal Expansion, µm/m-K | 13 | |
20 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.3 | |
20 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.4 | |
67 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 2.6 | |
11 |
Density, g/cm3 | 7.8 | |
2.7 |
Embodied Carbon, kg CO2/kg material | 1.5 | |
7.3 |
Embodied Energy, MJ/kg | 20 | |
140 |
Embodied Water, L/kg | 50 | |
950 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 77 to 120 | |
1.6 to 2.6 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 420 to 840 | |
240 to 580 |
Stiffness to Weight: Axial, points | 13 | |
15 |
Stiffness to Weight: Bending, points | 24 | |
52 |
Strength to Weight: Axial, points | 21 to 24 | |
19 to 30 |
Strength to Weight: Bending, points | 20 to 22 | |
27 to 36 |
Thermal Diffusivity, mm2/s | 10 | |
56 |
Thermal Shock Resistance, points | 18 to 20 | |
9.0 to 14 |
Alloy Composition
Aluminum (Al), % | 0 | |
75.3 to 79.6 |
Carbon (C), % | 0.43 to 0.48 | |
0 |
Chromium (Cr), % | 0.4 to 0.6 | |
0 |
Copper (Cu), % | 0 | |
4.0 to 5.0 |
Iron (Fe), % | 96.5 to 97.7 | |
0 to 0.5 |
Magnesium (Mg), % | 0 | |
0.45 to 0.65 |
Manganese (Mn), % | 0.75 to 1.0 | |
0 to 0.1 |
Molybdenum (Mo), % | 0.15 to 0.25 | |
0 |
Nickel (Ni), % | 0.4 to 0.7 | |
0 |
Phosphorus (P), % | 0 to 0.035 | |
0 |
Silicon (Si), % | 0.15 to 0.35 | |
16 to 18 |
Sulfur (S), % | 0 to 0.040 | |
0 |
Titanium (Ti), % | 0 | |
0 to 0.2 |
Zinc (Zn), % | 0 | |
0 to 0.1 |
Residuals, % | 0 | |
0 to 0.2 |