MakeItFrom.com
Menu (ESC)

SAE-AISI D3 Steel vs. 213.0 Aluminum

SAE-AISI D3 steel belongs to the iron alloys classification, while 213.0 aluminum belongs to the aluminum alloys. There are 27 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI D3 steel and the bottom bar is 213.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
73
Elongation at Break, % 9.8 to 15
1.5
Fatigue Strength, MPa 310 to 940
93
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 74
28
Tensile Strength: Ultimate (UTS), MPa 770 to 2050
190
Tensile Strength: Yield (Proof), MPa 480 to 1550
130

Thermal Properties

Latent Heat of Fusion, J/g 270
410
Melting Completion (Liquidus), °C 1430
670
Melting Onset (Solidus), °C 1390
480
Specific Heat Capacity, J/kg-K 480
850
Thermal Conductivity, W/m-K 31
130
Thermal Expansion, µm/m-K 12
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 3.0
34
Electrical Conductivity: Equal Weight (Specific), % IACS 3.5
94

Otherwise Unclassified Properties

Base Metal Price, % relative 8.0
11
Density, g/cm3 7.7
3.2
Embodied Carbon, kg CO2/kg material 3.2
7.7
Embodied Energy, MJ/kg 48
140
Embodied Water, L/kg 100
1090

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 97 to 180
2.5
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
44
Strength to Weight: Axial, points 28 to 74
16
Strength to Weight: Bending, points 24 to 47
23
Thermal Diffusivity, mm2/s 8.3
49
Thermal Shock Resistance, points 23 to 63
8.0

Alloy Composition

Aluminum (Al), % 0
83.5 to 93
Carbon (C), % 2.0 to 2.4
0
Chromium (Cr), % 11 to 13.5
0
Copper (Cu), % 0 to 0.25
6.0 to 8.0
Iron (Fe), % 80.3 to 87
0 to 1.2
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 0 to 0.6
0 to 0.6
Nickel (Ni), % 0 to 0.3
0 to 0.35
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.6
1.0 to 3.0
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.25
Tungsten (W), % 0 to 1.0
0
Vanadium (V), % 0 to 1.0
0
Zinc (Zn), % 0
0 to 2.5
Residuals, % 0
0 to 0.5