MakeItFrom.com
Menu (ESC)

SAE-AISI H11 Steel vs. 5083 Aluminum

SAE-AISI H11 steel belongs to the iron alloys classification, while 5083 aluminum belongs to the aluminum alloys. There are 23 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI H11 steel and the bottom bar is 5083 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 74
26
Tensile Strength: Ultimate (UTS), MPa 690 to 1840
290 to 390

Thermal Properties

Latent Heat of Fusion, J/g 270
400
Melting Completion (Liquidus), °C 1460
640
Melting Onset (Solidus), °C 1410
580
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 42
120
Thermal Expansion, µm/m-K 12
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 8.2
29
Electrical Conductivity: Equal Weight (Specific), % IACS 9.5
96

Otherwise Unclassified Properties

Base Metal Price, % relative 5.5
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.0
8.9
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 75
1170

Common Calculations

Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 25 to 66
29 to 40
Strength to Weight: Bending, points 22 to 43
36 to 44
Thermal Diffusivity, mm2/s 11
48
Thermal Shock Resistance, points 22 to 58
12 to 17

Alloy Composition

Aluminum (Al), % 0
92.4 to 95.6
Carbon (C), % 0.33 to 0.43
0
Chromium (Cr), % 4.8 to 5.5
0.050 to 0.25
Copper (Cu), % 0 to 0.25
0 to 0.1
Iron (Fe), % 89.6 to 92.5
0 to 0.4
Magnesium (Mg), % 0
4.0 to 4.9
Manganese (Mn), % 0.2 to 0.5
0.4 to 1.0
Molybdenum (Mo), % 1.1 to 1.6
0
Nickel (Ni), % 0 to 0.3
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0.8 to 1.2
0 to 0.4
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.15
Vanadium (V), % 0.3 to 0.6
0
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15

Comparable Variants