MakeItFrom.com
Menu (ESC)

SAE-AISI H42 Steel vs. 7010 Aluminum

SAE-AISI H42 steel belongs to the iron alloys classification, while 7010 aluminum belongs to the aluminum alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI H42 steel and the bottom bar is 7010 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 77
26
Tensile Strength: Ultimate (UTS), MPa 700 to 1980
520 to 590

Thermal Properties

Latent Heat of Fusion, J/g 260
380
Melting Completion (Liquidus), °C 1620
630
Melting Onset (Solidus), °C 1570
480
Specific Heat Capacity, J/kg-K 440
860
Thermal Conductivity, W/m-K 24
150
Thermal Expansion, µm/m-K 12
24

Otherwise Unclassified Properties

Base Metal Price, % relative 24
10
Density, g/cm3 8.4
3.0
Embodied Carbon, kg CO2/kg material 8.8
8.3
Embodied Energy, MJ/kg 130
150
Embodied Water, L/kg 98
1120

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 23
45
Strength to Weight: Axial, points 23 to 65
47 to 54
Strength to Weight: Bending, points 21 to 42
47 to 52
Thermal Diffusivity, mm2/s 6.5
58
Thermal Shock Resistance, points 20 to 57
22 to 26

Alloy Composition

Aluminum (Al), % 0
87.9 to 90.6
Carbon (C), % 0.55 to 0.7
0
Chromium (Cr), % 3.8 to 4.5
0 to 0.050
Copper (Cu), % 0 to 0.25
1.5 to 2.0
Iron (Fe), % 79.3 to 83.8
0 to 0.15
Magnesium (Mg), % 0
2.1 to 2.6
Manganese (Mn), % 0.15 to 0.4
0 to 0.1
Molybdenum (Mo), % 4.5 to 5.5
0
Nickel (Ni), % 0 to 0.3
0 to 0.050
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0
0 to 0.12
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.060
Tungsten (W), % 5.5 to 6.8
0
Vanadium (V), % 1.8 to 2.2
0
Zinc (Zn), % 0
5.7 to 6.7
Zirconium (Zr), % 0
0.1 to 0.16
Residuals, % 0
0 to 0.15