MakeItFrom.com
Menu (ESC)

SAE-AISI T5 Steel vs. EN AC-43300 Aluminum

SAE-AISI T5 steel belongs to the iron alloys classification, while EN AC-43300 aluminum belongs to the aluminum alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI T5 steel and the bottom bar is EN AC-43300 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 210
71
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 80
27
Tensile Strength: Ultimate (UTS), MPa 860 to 2140
280 to 290

Thermal Properties

Latent Heat of Fusion, J/g 250
540
Melting Completion (Liquidus), °C 1810
600
Melting Onset (Solidus), °C 1750
590
Specific Heat Capacity, J/kg-K 410
910
Thermal Conductivity, W/m-K 21
140
Thermal Expansion, µm/m-K 11
22

Otherwise Unclassified Properties

Base Metal Price, % relative 60
9.5
Density, g/cm3 9.4
2.5
Embodied Carbon, kg CO2/kg material 11
7.9
Embodied Energy, MJ/kg 170
150
Embodied Water, L/kg 140
1080

Common Calculations

Stiffness to Weight: Axial, points 12
15
Stiffness to Weight: Bending, points 21
54
Strength to Weight: Axial, points 25 to 63
31 to 32
Strength to Weight: Bending, points 21 to 39
37 to 38
Thermal Diffusivity, mm2/s 5.5
59
Thermal Shock Resistance, points 26 to 66
13 to 14

Alloy Composition

Aluminum (Al), % 0
88.9 to 90.8
Carbon (C), % 0.75 to 0.85
0
Chromium (Cr), % 3.8 to 5.0
0
Cobalt (Co), % 7.0 to 9.5
0
Copper (Cu), % 0 to 0.25
0 to 0.050
Iron (Fe), % 60.6 to 68.3
0 to 0.19
Magnesium (Mg), % 0
0.25 to 0.45
Manganese (Mn), % 0.2 to 0.4
0 to 0.1
Molybdenum (Mo), % 0.5 to 1.3
0
Nickel (Ni), % 0 to 0.3
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0.2 to 0.4
9.0 to 10
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.15
Tungsten (W), % 17.5 to 19
0
Vanadium (V), % 1.8 to 2.4
0
Zinc (Zn), % 0
0 to 0.070
Residuals, % 0
0 to 0.1