MakeItFrom.com
Menu (ESC)

SAE-AISI T5 Steel vs. EN AC-51300 Aluminum

SAE-AISI T5 steel belongs to the iron alloys classification, while EN AC-51300 aluminum belongs to the aluminum alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI T5 steel and the bottom bar is EN AC-51300 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 210
67
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 80
25
Tensile Strength: Ultimate (UTS), MPa 860 to 2140
190

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Melting Completion (Liquidus), °C 1810
640
Melting Onset (Solidus), °C 1750
600
Specific Heat Capacity, J/kg-K 410
910
Thermal Conductivity, W/m-K 21
110
Thermal Expansion, µm/m-K 11
24

Otherwise Unclassified Properties

Base Metal Price, % relative 60
9.5
Density, g/cm3 9.4
2.7
Embodied Carbon, kg CO2/kg material 11
9.1
Embodied Energy, MJ/kg 170
150
Embodied Water, L/kg 140
1180

Common Calculations

Stiffness to Weight: Axial, points 12
14
Stiffness to Weight: Bending, points 21
51
Strength to Weight: Axial, points 25 to 63
20
Strength to Weight: Bending, points 21 to 39
28
Thermal Diffusivity, mm2/s 5.5
45
Thermal Shock Resistance, points 26 to 66
8.6

Alloy Composition

Aluminum (Al), % 0
91.4 to 95.5
Carbon (C), % 0.75 to 0.85
0
Chromium (Cr), % 3.8 to 5.0
0
Cobalt (Co), % 7.0 to 9.5
0
Copper (Cu), % 0 to 0.25
0 to 0.1
Iron (Fe), % 60.6 to 68.3
0 to 0.55
Magnesium (Mg), % 0
4.5 to 6.5
Manganese (Mn), % 0.2 to 0.4
0 to 0.45
Molybdenum (Mo), % 0.5 to 1.3
0
Nickel (Ni), % 0 to 0.3
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0.2 to 0.4
0 to 0.55
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.2
Tungsten (W), % 17.5 to 19
0
Vanadium (V), % 1.8 to 2.4
0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15