Silica Aerogel vs. Alumina
Both silica aerogel and alumina are oxide-based engineering ceramics. There are 11 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is silica aerogel and the bottom bar is alumina.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 0.0050 | |
| 220 to 370 |
| Poisson's Ratio | 0.2 | |
| 0.22 to 0.24 |
| Tensile Strength: Ultimate (UTS), MPa | 0.016 | |
| 210 to 290 |
Thermal Properties
| Thermal Conductivity, W/m-K | 0.016 | |
| 14 to 30 |
| Thermal Expansion, µm/m-K | 2.0 | |
| 6.7 to 8.2 |
Otherwise Unclassified Properties
| Density, g/cm3 | 0.1 | |
| 3.4 to 4.1 |
Common Calculations
| Stiffness to Weight: Axial, points | 0.028 | |
| 35 to 53 |
| Stiffness to Weight: Bending, points | 57 | |
| 57 to 62 |
| Strength to Weight: Axial, points | 0.044 | |
| 14 to 23 |
| Strength to Weight: Bending, points | 1.4 | |
| 19 to 28 |
| Thermal Shock Resistance, points | 110 | |
| 4.9 to 14 |