Silicone Plastic vs. DAP
Both silicone plastic and DAP are thermoset plastics. There are 15 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown.
For each property being compared, the top bar is silicone plastic and the bottom bar is DAP.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 9.0 | |
13 |
Tensile Strength: Ultimate (UTS), MPa | 38 | |
28 |
Thermal Properties
Glass Transition Temperature, °C | 200 | |
150 |
Specific Heat Capacity, J/kg-K | 850 | |
1450 |
Thermal Conductivity, W/m-K | 0.35 | |
0.6 |
Thermal Expansion, µm/m-K | 35 | |
25 |
Electrical Properties
Dielectric Strength (Breakdown Potential), kV/mm | 30 | |
40 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 12 | |
13 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.9 | |
1.7 |
Common Calculations
Stiffness to Weight: Axial, points | 2.6 | |
4.1 |
Stiffness to Weight: Bending, points | 36 | |
46 |
Strength to Weight: Axial, points | 5.5 | |
4.5 |
Strength to Weight: Bending, points | 13 | |
12 |
Thermal Diffusivity, mm2/s | 0.22 | |
0.24 |
Thermal Shock Resistance, points | 8.5 | |
6.3 |