MakeItFrom.com
Menu (ESC)

Silver Chloride vs. Machinable Glass-ceramic

Silver chloride belongs to the non-glass optical ceramics classification, while machinable glass-ceramic belongs to the glass and glass-ceramics. There are 11 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is silver chloride and the bottom bar is machinable glass-ceramic.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 20
67
Poisson's Ratio 0.4
0.29
Shear Modulus, GPa 7.0
26

Thermal Properties

Specific Heat Capacity, J/kg-K 360
790
Thermal Conductivity, W/m-K 1.2
1.2
Thermal Expansion, µm/m-K 31
21

Electrical Properties

Dielectric Constant (Relative Permittivity) At 1 MHz 12
6.4

Otherwise Unclassified Properties

Density, g/cm3 5.6
2.7

Common Calculations

Stiffness to Weight: Axial, points 2.0
14
Stiffness to Weight: Bending, points 16
51
Thermal Diffusivity, mm2/s 0.57
0.56