Spruce-pine-fir vs. CAB
Spruce-pine-fir belongs to the wood-based materials classification, while CAB belongs to the thermoplastics. There are 11 material properties with values for both materials. Properties with values for just one material (19, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is spruce-pine-fir and the bottom bar is CAB.
Metric UnitsUS Customary Units
Mechanical Properties
Elongation at Break, % | 1.5 | |
50 to 55 |
Tensile Strength: Ultimate (UTS), MPa | 85 | |
20 to 50 |
Thermal Properties
Specific Heat Capacity, J/kg-K | 1380 | |
1460 |
Thermal Conductivity, W/m-K | 0.12 | |
0.25 |
Thermal Expansion, µm/m-K | 6.5 | |
14 |
Electrical Properties
Dielectric Strength (Breakdown Potential), kV/mm | 0.5 | |
15 |
Otherwise Unclassified Properties
Density, g/cm3 | 0.5 | |
1.2 |
Limiting Oxygen Index (LOI), % | 24 | |
18 |
Common Calculations
Strength to Weight: Axial, points | 47 | |
4.8 to 12 |
Strength to Weight: Bending, points | 86 | |
14 to 25 |
Thermal Diffusivity, mm2/s | 0.17 | |
0.14 to 0.15 |