Thermoplastic PI vs. ASA
Both thermoplastic PI and ASA are thermoplastics. There are 10 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is thermoplastic PI and the bottom bar is ASA.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.4 to 1.5 | |
| 1.1 |
| Elastic (Young's, Tensile) Modulus, GPa | 3.7 to 20 | |
| 2.6 |
| Elongation at Break, % | 1.8 to 7.5 | |
| 6.0 |
| Glass Transition Temperature, °C | 260 | |
| 100 |
| Specific Heat Capacity, J/kg-K | 970 to 1100 | |
| 1300 |
| Stiffness to Weight: Axial, points | 1.5 to 7.9 | |
| 1.3 |
| Stiffness to Weight: Bending, points | 37 to 64 | |
| 43 |
| Strength to Weight: Axial, points | 22 to 42 | |
| 14 |
| Strength to Weight: Bending, points | 36 to 57 | |
| 30 |
| Tensile Strength: Ultimate (UTS), MPa | 110 to 220 | |
| 55 |