Thermoplastic PI vs. Melamine
Thermoplastic PI belongs to the thermoplastics classification, while melamine belongs to the thermoset plastics. There are 11 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.
For each property being compared, the top bar is thermoplastic PI and the bottom bar is melamine.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 3.7 to 20 | |
| 7.0 |
| Elongation at Break, % | 1.8 to 7.5 | |
| 1.0 |
| Tensile Strength: Ultimate (UTS), MPa | 110 to 220 | |
| 30 |
Thermal Properties
| Maximum Temperature: Autoignition, °C | 600 | |
| 350 |
| Maximum Temperature: Decomposition, °C | 530 | |
| 350 |
| Specific Heat Capacity, J/kg-K | 970 to 1100 | |
| 1200 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.4 to 1.5 | |
| 1.5 |
Common Calculations
| Stiffness to Weight: Axial, points | 1.5 to 7.9 | |
| 2.6 |
| Stiffness to Weight: Bending, points | 37 to 64 | |
| 43 |
| Strength to Weight: Axial, points | 22 to 42 | |
| 5.6 |
| Strength to Weight: Bending, points | 36 to 57 | |
| 14 |