Thermoplastic PI vs. PA 4/6
Both thermoplastic PI and PA 4/6 are thermoplastics. There are 5 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is thermoplastic PI and the bottom bar is PA 4/6.
Metric UnitsUS Customary Units
Material Properties
| Elastic (Young's, Tensile) Modulus, GPa | 3.7 to 20 | |
| 1.0 to 16 |
| Elongation at Break, % | 1.8 to 7.5 | |
| 2.5 to 50 |
| Flexural Modulus, GPa | 3.8 to 19 | |
| 0.9 to 14 |
| Flexural Strength, MPa | 170 to 330 | |
| 50 to 350 |
| Tensile Strength: Ultimate (UTS), MPa | 110 to 220 | |
| 120 to 250 |