Thermoplastic PI vs. PPS
Both thermoplastic PI and PPS are thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is thermoplastic PI and the bottom bar is PPS.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.4 to 1.5 | |
| 1.3 to 1.7 |
| Elongation at Break, % | 1.8 to 7.5 | |
| 2.5 to 11 |
| Flexural Modulus, GPa | 3.8 to 19 | |
| 13 to 17 |
| Flexural Strength, MPa | 170 to 330 | |
| 120 to 190 |
| Glass Transition Temperature, °C | 260 | |
| 190 to 290 |
| Specific Heat Capacity, J/kg-K | 970 to 1100 | |
| 910 to 1000 |
| Strength to Weight: Axial, points | 22 to 42 | |
| 16 to 37 |
| Strength to Weight: Bending, points | 36 to 57 | |
| 30 to 52 |
| Tensile Strength: Ultimate (UTS), MPa | 110 to 220 | |
| 75 to 190 |