Thermoset PI vs. Silicone Plastic
Both thermoset PI and silicone plastic are thermoset plastics. There are 12 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown.
For each property being compared, the top bar is thermoset PI and the bottom bar is silicone plastic.
Metric UnitsUS Customary Units
Mechanical Properties
Tensile Strength: Ultimate (UTS), MPa | 37 to 81 | |
38 |
Thermal Properties
Glass Transition Temperature, °C | 360 | |
200 |
Maximum Temperature: Decomposition, °C | 330 | |
480 |
Specific Heat Capacity, J/kg-K | 1130 | |
850 |
Thermal Conductivity, W/m-K | 0.29 to 1.7 | |
0.35 |
Thermal Expansion, µm/m-K | 38 to 54 | |
35 |
Electrical Properties
Dielectric Strength (Breakdown Potential), kV/mm | 20 | |
30 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 15 | |
12 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.4 to 1.6 | |
1.9 |
Common Calculations
Strength to Weight: Axial, points | 6.5 to 16 | |
5.5 |
Strength to Weight: Bending, points | 16 to 30 | |
13 |
Thermal Diffusivity, mm2/s | 0.18 to 0.95 | |
0.22 |