Type 4 Magnetic Alloy vs. A535.0 Aluminum
Type 4 magnetic alloy belongs to the nickel alloys classification, while A535.0 aluminum belongs to the aluminum alloys. There are 27 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is Type 4 magnetic alloy and the bottom bar is A535.0 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
67 |
Elongation at Break, % | 2.0 to 40 | |
9.0 |
Fatigue Strength, MPa | 220 to 400 | |
95 |
Poisson's Ratio | 0.31 | |
0.33 |
Shear Modulus, GPa | 73 | |
25 |
Tensile Strength: Ultimate (UTS), MPa | 620 to 1100 | |
250 |
Tensile Strength: Yield (Proof), MPa | 270 to 1040 | |
120 |
Thermal Properties
Latent Heat of Fusion, J/g | 290 | |
390 |
Maximum Temperature: Mechanical, °C | 900 | |
170 |
Melting Completion (Liquidus), °C | 1420 | |
620 |
Melting Onset (Solidus), °C | 1370 | |
550 |
Specific Heat Capacity, J/kg-K | 440 | |
910 |
Thermal Expansion, µm/m-K | 11 | |
24 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 2.9 | |
23 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 3.0 | |
79 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 60 | |
9.5 |
Density, g/cm3 | 8.8 | |
2.6 |
Embodied Carbon, kg CO2/kg material | 10 | |
9.3 |
Embodied Energy, MJ/kg | 140 | |
160 |
Embodied Water, L/kg | 210 | |
1180 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 22 to 200 | |
19 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 190 to 2840 | |
120 |
Stiffness to Weight: Axial, points | 12 | |
14 |
Stiffness to Weight: Bending, points | 22 | |
51 |
Strength to Weight: Axial, points | 19 to 35 | |
26 |
Strength to Weight: Bending, points | 18 to 27 | |
33 |
Thermal Shock Resistance, points | 21 to 37 | |
11 |
Alloy Composition
Aluminum (Al), % | 0 | |
91.4 to 93.4 |
Carbon (C), % | 0 to 0.050 | |
0 |
Chromium (Cr), % | 0 to 0.3 | |
0 |
Cobalt (Co), % | 0 to 0.5 | |
0 |
Copper (Cu), % | 0 to 0.3 | |
0 to 0.1 |
Iron (Fe), % | 9.5 to 17.5 | |
0 to 0.2 |
Magnesium (Mg), % | 0 | |
6.5 to 7.5 |
Manganese (Mn), % | 0 to 0.8 | |
0.1 to 0.25 |
Molybdenum (Mo), % | 3.5 to 6.0 | |
0 |
Nickel (Ni), % | 79 to 82 | |
0 |
Phosphorus (P), % | 0 to 0.010 | |
0 |
Silicon (Si), % | 0 to 0.5 | |
0 to 0.2 |
Sulfur (S), % | 0 to 0.020 | |
0 |
Titanium (Ti), % | 0 | |
0 to 0.25 |
Residuals, % | 0 | |
0 to 0.15 |