MakeItFrom.com
Menu (ESC)

C14700 Copper vs. 3005 Aluminum

C14700 copper belongs to the copper alloys classification, while 3005 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C14700 copper and the bottom bar is 3005 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
70
Elongation at Break, % 9.1 to 35
1.1 to 16
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 43
26
Shear Strength, MPa 160 to 190
84 to 150
Tensile Strength: Ultimate (UTS), MPa 240 to 320
140 to 270
Tensile Strength: Yield (Proof), MPa 85 to 250
51 to 240

Thermal Properties

Latent Heat of Fusion, J/g 210
400
Maximum Temperature: Mechanical, °C 200
180
Melting Completion (Liquidus), °C 1080
660
Melting Onset (Solidus), °C 1070
640
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 370
160
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 95
42
Electrical Conductivity: Equal Weight (Specific), % IACS 96
140

Otherwise Unclassified Properties

Base Metal Price, % relative 30
9.5
Density, g/cm3 8.9
2.8
Embodied Carbon, kg CO2/kg material 2.6
8.2
Embodied Energy, MJ/kg 41
150
Embodied Water, L/kg 310
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 25 to 65
2.2 to 18
Resilience: Unit (Modulus of Resilience), kJ/m3 31 to 280
18 to 390
Stiffness to Weight: Axial, points 7.2
14
Stiffness to Weight: Bending, points 18
49
Strength to Weight: Axial, points 7.3 to 10
14 to 27
Strength to Weight: Bending, points 9.5 to 12
21 to 33
Thermal Diffusivity, mm2/s 110
64
Thermal Shock Resistance, points 8.4 to 12
6.0 to 12

Alloy Composition

Aluminum (Al), % 0
95.7 to 98.8
Chromium (Cr), % 0
0 to 0.1
Copper (Cu), % 99.395 to 99.798
0 to 0.3
Iron (Fe), % 0
0 to 0.7
Magnesium (Mg), % 0
0.2 to 0.6
Manganese (Mn), % 0
1.0 to 1.5
Phosphorus (P), % 0.0020 to 0.0050
0
Silicon (Si), % 0
0 to 0.6
Sulfur (S), % 0.2 to 0.5
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15