MakeItFrom.com
Menu (ESC)

C18700 Copper vs. 6060 Aluminum

C18700 copper belongs to the copper alloys classification, while 6060 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C18700 copper and the bottom bar is 6060 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
68
Elongation at Break, % 9.0 to 9.6
9.0 to 16
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 43
26
Shear Strength, MPa 170 to 190
86 to 130
Tensile Strength: Ultimate (UTS), MPa 290 to 330
140 to 220
Tensile Strength: Yield (Proof), MPa 230 to 250
71 to 170

Thermal Properties

Latent Heat of Fusion, J/g 210
400
Maximum Temperature: Mechanical, °C 200
160
Melting Completion (Liquidus), °C 1080
660
Melting Onset (Solidus), °C 950
610
Specific Heat Capacity, J/kg-K 380
900
Thermal Conductivity, W/m-K 380
210
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 98
54
Electrical Conductivity: Equal Weight (Specific), % IACS 99
180

Otherwise Unclassified Properties

Base Metal Price, % relative 30
9.5
Density, g/cm3 9.0
2.7
Embodied Carbon, kg CO2/kg material 2.6
8.3
Embodied Energy, MJ/kg 41
150
Embodied Water, L/kg 310
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 29
13 to 24
Resilience: Unit (Modulus of Resilience), kJ/m3 240 to 280
37 to 210
Stiffness to Weight: Axial, points 7.1
14
Stiffness to Weight: Bending, points 18
50
Strength to Weight: Axial, points 9.0 to 10
14 to 23
Strength to Weight: Bending, points 11 to 12
22 to 30
Thermal Diffusivity, mm2/s 110
85
Thermal Shock Resistance, points 10 to 12
6.3 to 9.9

Alloy Composition

Aluminum (Al), % 0
97.9 to 99.3
Chromium (Cr), % 0
0 to 0.050
Copper (Cu), % 98 to 99.2
0 to 0.1
Iron (Fe), % 0
0.1 to 0.3
Lead (Pb), % 0.8 to 1.5
0
Magnesium (Mg), % 0
0.35 to 0.6
Manganese (Mn), % 0
0 to 0.1
Silicon (Si), % 0
0.3 to 0.6
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.15