MakeItFrom.com
Menu (ESC)

C32000 Brass vs. 380.0 Aluminum

C32000 brass belongs to the copper alloys classification, while 380.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C32000 brass and the bottom bar is 380.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
74
Elongation at Break, % 6.8 to 29
3.0
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 41
28
Shear Strength, MPa 180 to 280
190
Tensile Strength: Ultimate (UTS), MPa 270 to 470
320
Tensile Strength: Yield (Proof), MPa 78 to 390
160

Thermal Properties

Latent Heat of Fusion, J/g 190
510
Maximum Temperature: Mechanical, °C 170
170
Melting Completion (Liquidus), °C 1020
590
Melting Onset (Solidus), °C 990
540
Specific Heat Capacity, J/kg-K 380
870
Thermal Conductivity, W/m-K 160
100
Thermal Expansion, µm/m-K 19
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 36
27
Electrical Conductivity: Equal Weight (Specific), % IACS 37
83

Otherwise Unclassified Properties

Base Metal Price, % relative 28
10
Density, g/cm3 8.7
2.9
Embodied Carbon, kg CO2/kg material 2.6
7.5
Embodied Energy, MJ/kg 42
140
Embodied Water, L/kg 310
1040

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 30 to 59
8.0
Resilience: Unit (Modulus of Resilience), kJ/m3 28 to 680
170
Stiffness to Weight: Axial, points 7.1
14
Stiffness to Weight: Bending, points 18
48
Strength to Weight: Axial, points 8.8 to 15
31
Strength to Weight: Bending, points 11 to 16
36
Thermal Diffusivity, mm2/s 47
40
Thermal Shock Resistance, points 9.5 to 16
14

Alloy Composition

Aluminum (Al), % 0
79.6 to 89.5
Copper (Cu), % 83.5 to 86.5
3.0 to 4.0
Iron (Fe), % 0 to 0.1
0 to 2.0
Lead (Pb), % 1.5 to 2.2
0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.25
0 to 0.5
Silicon (Si), % 0
7.5 to 9.5
Tin (Sn), % 0
0 to 0.35
Zinc (Zn), % 10.6 to 15
0 to 3.0
Residuals, % 0
0 to 0.5