MakeItFrom.com
Menu (ESC)

C35600 Brass vs. 1100A Aluminum

C35600 brass belongs to the copper alloys classification, while 1100A aluminum belongs to the aluminum alloys. There are 24 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C35600 brass and the bottom bar is 1100A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
69
Poisson's Ratio 0.31
0.33
Shear Modulus, GPa 39
26
Tensile Strength: Ultimate (UTS), MPa 340 to 650
89 to 170

Thermal Properties

Latent Heat of Fusion, J/g 170
400
Maximum Temperature: Mechanical, °C 120
170
Melting Completion (Liquidus), °C 900
640
Melting Onset (Solidus), °C 890
640
Specific Heat Capacity, J/kg-K 380
900
Thermal Conductivity, W/m-K 120
230
Thermal Expansion, µm/m-K 21
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26
60
Electrical Conductivity: Equal Weight (Specific), % IACS 29
200

Otherwise Unclassified Properties

Base Metal Price, % relative 23
9.5
Density, g/cm3 8.1
2.7
Embodied Carbon, kg CO2/kg material 2.6
8.2
Embodied Energy, MJ/kg 45
150
Embodied Water, L/kg 320
1190

Common Calculations

Stiffness to Weight: Axial, points 7.0
14
Stiffness to Weight: Bending, points 19
50
Strength to Weight: Axial, points 11 to 22
9.1 to 17
Strength to Weight: Bending, points 13 to 21
16 to 25
Thermal Diffusivity, mm2/s 38
93
Thermal Shock Resistance, points 11 to 22
4.0 to 7.6

Alloy Composition

Aluminum (Al), % 0
99 to 100
Copper (Cu), % 60 to 63
0.050 to 0.2
Iron (Fe), % 0 to 0.1
0 to 1.0
Lead (Pb), % 2.0 to 3.0
0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 0
0 to 0.050
Silicon (Si), % 0
0 to 1.0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 33.4 to 38
0 to 0.1
Residuals, % 0
0 to 0.15