MakeItFrom.com
Menu (ESC)

C42200 Brass vs. 5083 Aluminum

C42200 brass belongs to the copper alloys classification, while 5083 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C42200 brass and the bottom bar is 5083 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
68
Elongation at Break, % 2.0 to 46
1.1 to 17
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 42
26
Shear Strength, MPa 210 to 350
170 to 220
Tensile Strength: Ultimate (UTS), MPa 300 to 610
290 to 390
Tensile Strength: Yield (Proof), MPa 100 to 570
110 to 340

Thermal Properties

Latent Heat of Fusion, J/g 200
400
Maximum Temperature: Mechanical, °C 170
190
Melting Completion (Liquidus), °C 1040
640
Melting Onset (Solidus), °C 1020
580
Specific Heat Capacity, J/kg-K 380
900
Thermal Conductivity, W/m-K 130
120
Thermal Expansion, µm/m-K 18
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 31
29
Electrical Conductivity: Equal Weight (Specific), % IACS 32
96

Otherwise Unclassified Properties

Base Metal Price, % relative 29
9.5
Density, g/cm3 8.6
2.7
Embodied Carbon, kg CO2/kg material 2.7
8.9
Embodied Energy, MJ/kg 44
150
Embodied Water, L/kg 320
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 110
4.2 to 42
Resilience: Unit (Modulus of Resilience), kJ/m3 49 to 1460
95 to 860
Stiffness to Weight: Axial, points 7.2
14
Stiffness to Weight: Bending, points 19
50
Strength to Weight: Axial, points 9.5 to 19
29 to 40
Strength to Weight: Bending, points 11 to 18
36 to 44
Thermal Diffusivity, mm2/s 39
48
Thermal Shock Resistance, points 10 to 21
12 to 17

Alloy Composition

Aluminum (Al), % 0
92.4 to 95.6
Chromium (Cr), % 0
0.050 to 0.25
Copper (Cu), % 86 to 89
0 to 0.1
Iron (Fe), % 0 to 0.050
0 to 0.4
Lead (Pb), % 0 to 0.050
0
Magnesium (Mg), % 0
4.0 to 4.9
Manganese (Mn), % 0
0.4 to 1.0
Phosphorus (P), % 0 to 0.35
0
Silicon (Si), % 0
0 to 0.4
Tin (Sn), % 0.8 to 1.4
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 8.7 to 13.2
0 to 0.25
Residuals, % 0
0 to 0.15