C66100 Bronze vs. EN 1.3520 Steel
C66100 bronze belongs to the copper alloys classification, while EN 1.3520 steel belongs to the iron alloys. There are 22 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown.
For each property being compared, the top bar is C66100 bronze and the bottom bar is EN 1.3520 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 120 | |
190 |
Poisson's Ratio | 0.34 | |
0.29 |
Shear Modulus, GPa | 43 | |
72 |
Tensile Strength: Ultimate (UTS), MPa | 410 to 790 | |
620 to 730 |
Thermal Properties
Latent Heat of Fusion, J/g | 260 | |
260 |
Maximum Temperature: Mechanical, °C | 200 | |
430 |
Melting Completion (Liquidus), °C | 1050 | |
1440 |
Melting Onset (Solidus), °C | 1000 | |
1400 |
Specific Heat Capacity, J/kg-K | 400 | |
480 |
Thermal Conductivity, W/m-K | 34 | |
43 |
Thermal Expansion, µm/m-K | 17 | |
13 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 29 | |
2.6 |
Density, g/cm3 | 8.7 | |
7.8 |
Embodied Carbon, kg CO2/kg material | 2.6 | |
1.5 |
Embodied Energy, MJ/kg | 42 | |
20 |
Embodied Water, L/kg | 300 | |
54 |
Common Calculations
Stiffness to Weight: Axial, points | 7.4 | |
13 |
Stiffness to Weight: Bending, points | 19 | |
25 |
Strength to Weight: Axial, points | 13 to 25 | |
22 to 26 |
Strength to Weight: Bending, points | 14 to 22 | |
21 to 23 |
Thermal Diffusivity, mm2/s | 9.7 | |
12 |
Thermal Shock Resistance, points | 15 to 29 | |
18 to 22 |
Alloy Composition
Aluminum (Al), % | 0 | |
0 to 0.050 |
Carbon (C), % | 0 | |
0.93 to 1.1 |
Chromium (Cr), % | 0 | |
1.4 to 1.7 |
Copper (Cu), % | 92 to 97 | |
0 to 0.3 |
Iron (Fe), % | 0 to 0.25 | |
95.9 to 97.2 |
Lead (Pb), % | 0.2 to 0.8 | |
0 |
Manganese (Mn), % | 0 to 1.5 | |
1.0 to 1.2 |
Molybdenum (Mo), % | 0 | |
0 to 0.1 |
Oxygen (O), % | 0 | |
0 to 0.0015 |
Phosphorus (P), % | 0 | |
0 to 0.025 |
Silicon (Si), % | 2.8 to 3.5 | |
0.45 to 0.75 |
Sulfur (S), % | 0 | |
0 to 0.030 |
Zinc (Zn), % | 0 to 1.5 | |
0 |
Residuals, % | 0 to 0.5 | |
0 |