MakeItFrom.com
Menu (ESC)

C66200 Brass vs. EN AC-21200 Aluminum

C66200 brass belongs to the copper alloys classification, while EN AC-21200 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C66200 brass and the bottom bar is EN AC-21200 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
71
Elongation at Break, % 8.0 to 15
3.9 to 6.2
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 42
27
Tensile Strength: Ultimate (UTS), MPa 450 to 520
410 to 440
Tensile Strength: Yield (Proof), MPa 410 to 480
270 to 360

Thermal Properties

Latent Heat of Fusion, J/g 200
390
Maximum Temperature: Mechanical, °C 180
170
Melting Completion (Liquidus), °C 1070
660
Melting Onset (Solidus), °C 1030
550
Specific Heat Capacity, J/kg-K 390
880
Thermal Conductivity, W/m-K 150
130
Thermal Expansion, µm/m-K 18
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
34
Electrical Conductivity: Equal Weight (Specific), % IACS 36
100

Otherwise Unclassified Properties

Base Metal Price, % relative 29
10
Density, g/cm3 8.7
3.0
Embodied Carbon, kg CO2/kg material 2.7
8.0
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 320
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 40 to 66
16 to 22
Resilience: Unit (Modulus of Resilience), kJ/m3 760 to 1030
500 to 930
Stiffness to Weight: Axial, points 7.2
13
Stiffness to Weight: Bending, points 19
46
Strength to Weight: Axial, points 14 to 17
38 to 40
Strength to Weight: Bending, points 15 to 16
41 to 43
Thermal Diffusivity, mm2/s 45
49
Thermal Shock Resistance, points 16 to 18
18 to 19

Alloy Composition

Aluminum (Al), % 0
93.3 to 95.7
Copper (Cu), % 86.6 to 91
4.0 to 5.0
Iron (Fe), % 0 to 0.050
0 to 0.2
Lead (Pb), % 0 to 0.050
0 to 0.030
Magnesium (Mg), % 0
0.15 to 0.5
Manganese (Mn), % 0
0.2 to 0.5
Nickel (Ni), % 0.3 to 1.0
0 to 0.050
Phosphorus (P), % 0.050 to 0.2
0
Silicon (Si), % 0
0 to 0.1
Tin (Sn), % 0.2 to 0.7
0 to 0.030
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 6.5 to 12.9
0 to 0.1
Residuals, % 0
0 to 0.1