MakeItFrom.com
Menu (ESC)

C74400 Nickel Silver vs. 7005 Aluminum

C74400 nickel silver belongs to the copper alloys classification, while 7005 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C74400 nickel silver and the bottom bar is 7005 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
70
Elongation at Break, % 43
10 to 20
Poisson's Ratio 0.31
0.33
Shear Modulus, GPa 39
26
Shear Strength, MPa 240
120 to 230
Tensile Strength: Ultimate (UTS), MPa 350
200 to 400
Tensile Strength: Yield (Proof), MPa 120
95 to 350

Thermal Properties

Latent Heat of Fusion, J/g 180
380
Maximum Temperature: Mechanical, °C 140
200
Melting Completion (Liquidus), °C 930
640
Melting Onset (Solidus), °C 910
610
Specific Heat Capacity, J/kg-K 390
880
Thermal Conductivity, W/m-K 120
140 to 170
Thermal Expansion, µm/m-K 20
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26
35 to 43
Electrical Conductivity: Equal Weight (Specific), % IACS 29
110 to 130

Otherwise Unclassified Properties

Base Metal Price, % relative 25
9.5
Density, g/cm3 8.2
2.9
Embodied Carbon, kg CO2/kg material 2.9
8.3
Embodied Energy, MJ/kg 48
150
Embodied Water, L/kg 320
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120
32 to 57
Resilience: Unit (Modulus of Resilience), kJ/m3 63
65 to 850
Stiffness to Weight: Axial, points 7.4
13
Stiffness to Weight: Bending, points 19
47
Strength to Weight: Axial, points 12
19 to 38
Strength to Weight: Bending, points 14
26 to 41
Thermal Diffusivity, mm2/s 37
54 to 65
Thermal Shock Resistance, points 12
8.7 to 18

Alloy Composition

Aluminum (Al), % 0
91 to 94.7
Chromium (Cr), % 0
0.060 to 0.2
Copper (Cu), % 62 to 66
0 to 0.1
Iron (Fe), % 0 to 0.050
0 to 0.4
Lead (Pb), % 0 to 0.050
0
Magnesium (Mg), % 0
1.0 to 1.8
Manganese (Mn), % 0
0.2 to 0.7
Nickel (Ni), % 2.0 to 4.0
0
Silicon (Si), % 0
0 to 0.35
Titanium (Ti), % 0
0.010 to 0.060
Zinc (Zn), % 29.6 to 36
4.0 to 5.0
Zirconium (Zr), % 0
0.080 to 0.2
Residuals, % 0
0 to 0.15