MakeItFrom.com
Menu (ESC)

C79600 Nickel Silver vs. 1100A Aluminum

C79600 nickel silver belongs to the copper alloys classification, while 1100A aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C79600 nickel silver and the bottom bar is 1100A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
69
Elongation at Break, % 15
4.5 to 34
Poisson's Ratio 0.3
0.33
Shear Modulus, GPa 43
26
Shear Strength, MPa 290
59 to 99
Tensile Strength: Ultimate (UTS), MPa 480
89 to 170
Tensile Strength: Yield (Proof), MPa 300
29 to 150

Thermal Properties

Latent Heat of Fusion, J/g 180
400
Maximum Temperature: Mechanical, °C 130
170
Melting Completion (Liquidus), °C 930
640
Melting Onset (Solidus), °C 880
640
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 36
230
Thermal Expansion, µm/m-K 21
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
60
Electrical Conductivity: Equal Weight (Specific), % IACS 8.0
200

Otherwise Unclassified Properties

Base Metal Price, % relative 25
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 3.5
8.2
Embodied Energy, MJ/kg 57
150
Embodied Water, L/kg 310
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 63
6.4 to 23
Resilience: Unit (Modulus of Resilience), kJ/m3 400
5.9 to 150
Stiffness to Weight: Axial, points 7.8
14
Stiffness to Weight: Bending, points 20
50
Strength to Weight: Axial, points 17
9.1 to 17
Strength to Weight: Bending, points 17
16 to 25
Thermal Diffusivity, mm2/s 12
93
Thermal Shock Resistance, points 15
4.0 to 7.6

Alloy Composition

Aluminum (Al), % 0
99 to 100
Copper (Cu), % 43.5 to 46.5
0.050 to 0.2
Iron (Fe), % 0
0 to 1.0
Lead (Pb), % 0.8 to 1.2
0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 1.5 to 2.5
0 to 0.050
Nickel (Ni), % 9.0 to 11
0
Silicon (Si), % 0
0 to 1.0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 38.3 to 45.2
0 to 0.1
Residuals, % 0
0 to 0.15