MakeItFrom.com
Menu (ESC)

C79600 Nickel Silver vs. 5154 Aluminum

C79600 nickel silver belongs to the copper alloys classification, while 5154 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C79600 nickel silver and the bottom bar is 5154 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
68
Elongation at Break, % 15
3.4 to 20
Poisson's Ratio 0.3
0.33
Shear Modulus, GPa 43
26
Shear Strength, MPa 290
140 to 210
Tensile Strength: Ultimate (UTS), MPa 480
240 to 360
Tensile Strength: Yield (Proof), MPa 300
94 to 270

Thermal Properties

Latent Heat of Fusion, J/g 180
400
Maximum Temperature: Mechanical, °C 130
190
Melting Completion (Liquidus), °C 930
640
Melting Onset (Solidus), °C 880
590
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 36
130
Thermal Expansion, µm/m-K 21
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
32
Electrical Conductivity: Equal Weight (Specific), % IACS 8.0
110

Otherwise Unclassified Properties

Base Metal Price, % relative 25
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 3.5
8.8
Embodied Energy, MJ/kg 57
150
Embodied Water, L/kg 310
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 63
11 to 39
Resilience: Unit (Modulus of Resilience), kJ/m3 400
64 to 540
Stiffness to Weight: Axial, points 7.8
14
Stiffness to Weight: Bending, points 20
51
Strength to Weight: Axial, points 17
25 to 37
Strength to Weight: Bending, points 17
32 to 42
Thermal Diffusivity, mm2/s 12
52
Thermal Shock Resistance, points 15
10 to 16

Alloy Composition

Aluminum (Al), % 0
94.4 to 96.8
Chromium (Cr), % 0
0.15 to 0.35
Copper (Cu), % 43.5 to 46.5
0 to 0.1
Iron (Fe), % 0
0 to 0.4
Lead (Pb), % 0.8 to 1.2
0
Magnesium (Mg), % 0
3.1 to 3.9
Manganese (Mn), % 1.5 to 2.5
0 to 0.1
Nickel (Ni), % 9.0 to 11
0
Silicon (Si), % 0
0 to 0.25
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 38.3 to 45.2
0 to 0.2
Residuals, % 0
0 to 0.15