MakeItFrom.com
Menu (ESC)

C79600 Nickel Silver vs. 6110A Aluminum

C79600 nickel silver belongs to the copper alloys classification, while 6110A aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C79600 nickel silver and the bottom bar is 6110A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
70
Elongation at Break, % 15
11 to 18
Poisson's Ratio 0.3
0.33
Shear Modulus, GPa 43
26
Shear Strength, MPa 290
220 to 280
Tensile Strength: Ultimate (UTS), MPa 480
360 to 470
Tensile Strength: Yield (Proof), MPa 300
250 to 430

Thermal Properties

Latent Heat of Fusion, J/g 180
410
Maximum Temperature: Mechanical, °C 130
190
Melting Completion (Liquidus), °C 930
650
Melting Onset (Solidus), °C 880
600
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 36
160
Thermal Expansion, µm/m-K 21
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
42
Electrical Conductivity: Equal Weight (Specific), % IACS 8.0
140

Otherwise Unclassified Properties

Base Metal Price, % relative 25
9.5
Density, g/cm3 7.9
2.8
Embodied Carbon, kg CO2/kg material 3.5
8.4
Embodied Energy, MJ/kg 57
150
Embodied Water, L/kg 310
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 63
47 to 58
Resilience: Unit (Modulus of Resilience), kJ/m3 400
450 to 1300
Stiffness to Weight: Axial, points 7.8
14
Stiffness to Weight: Bending, points 20
50
Strength to Weight: Axial, points 17
36 to 47
Strength to Weight: Bending, points 17
41 to 48
Thermal Diffusivity, mm2/s 12
65
Thermal Shock Resistance, points 15
16 to 21

Alloy Composition

Aluminum (Al), % 0
94.8 to 98
Chromium (Cr), % 0
0.050 to 0.25
Copper (Cu), % 43.5 to 46.5
0.3 to 0.8
Iron (Fe), % 0
0 to 0.5
Lead (Pb), % 0.8 to 1.2
0
Magnesium (Mg), % 0
0.7 to 1.1
Manganese (Mn), % 1.5 to 2.5
0.3 to 0.9
Nickel (Ni), % 9.0 to 11
0
Silicon (Si), % 0
0.7 to 1.1
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 38.3 to 45.2
0 to 0.2
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15