MakeItFrom.com
Menu (ESC)

C79600 Nickel Silver vs. 7075 Aluminum

C79600 nickel silver belongs to the copper alloys classification, while 7075 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C79600 nickel silver and the bottom bar is 7075 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
70
Elongation at Break, % 15
1.8 to 12
Poisson's Ratio 0.3
0.32
Shear Modulus, GPa 43
26
Shear Strength, MPa 290
150 to 340
Tensile Strength: Ultimate (UTS), MPa 480
240 to 590
Tensile Strength: Yield (Proof), MPa 300
120 to 510

Thermal Properties

Latent Heat of Fusion, J/g 180
380
Maximum Temperature: Mechanical, °C 130
200
Melting Completion (Liquidus), °C 930
640
Melting Onset (Solidus), °C 880
480
Specific Heat Capacity, J/kg-K 390
870
Thermal Conductivity, W/m-K 36
130
Thermal Expansion, µm/m-K 21
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
33
Electrical Conductivity: Equal Weight (Specific), % IACS 8.0
98

Otherwise Unclassified Properties

Base Metal Price, % relative 25
10
Density, g/cm3 7.9
3.0
Embodied Carbon, kg CO2/kg material 3.5
8.3
Embodied Energy, MJ/kg 57
150
Embodied Water, L/kg 310
1120

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 63
7.8 to 44
Resilience: Unit (Modulus of Resilience), kJ/m3 400
110 to 1870
Stiffness to Weight: Axial, points 7.8
13
Stiffness to Weight: Bending, points 20
46
Strength to Weight: Axial, points 17
22 to 54
Strength to Weight: Bending, points 17
28 to 52
Thermal Diffusivity, mm2/s 12
50
Thermal Shock Resistance, points 15
10 to 25

Alloy Composition

Aluminum (Al), % 0
86.9 to 91.4
Chromium (Cr), % 0
0.18 to 0.28
Copper (Cu), % 43.5 to 46.5
1.2 to 2.0
Iron (Fe), % 0
0 to 0.5
Lead (Pb), % 0.8 to 1.2
0
Magnesium (Mg), % 0
2.1 to 2.9
Manganese (Mn), % 1.5 to 2.5
0 to 0.3
Nickel (Ni), % 9.0 to 11
0
Silicon (Si), % 0
0 to 0.4
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 38.3 to 45.2
5.1 to 6.1
Zirconium (Zr), % 0
0 to 0.25
Residuals, % 0
0 to 0.15