MakeItFrom.com
Menu (ESC)

C82200 Copper vs. 6360 Aluminum

C82200 copper belongs to the copper alloys classification, while 6360 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C82200 copper and the bottom bar is 6360 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
68
Elongation at Break, % 8.0 to 20
9.0 to 18
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 44
26
Tensile Strength: Ultimate (UTS), MPa 390 to 660
120 to 220
Tensile Strength: Yield (Proof), MPa 210 to 520
57 to 170

Thermal Properties

Latent Heat of Fusion, J/g 220
400
Maximum Temperature: Mechanical, °C 230
160
Melting Completion (Liquidus), °C 1080
640
Melting Onset (Solidus), °C 1040
630
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 180
210
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 45
54
Electrical Conductivity: Equal Weight (Specific), % IACS 46
180

Otherwise Unclassified Properties

Base Metal Price, % relative 55
9.5
Density, g/cm3 8.9
2.7
Embodied Carbon, kg CO2/kg material 4.8
8.3
Embodied Energy, MJ/kg 74
150
Embodied Water, L/kg 310
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 49 to 66
14 to 19
Resilience: Unit (Modulus of Resilience), kJ/m3 180 to 1130
24 to 210
Stiffness to Weight: Axial, points 7.4
14
Stiffness to Weight: Bending, points 18
50
Strength to Weight: Axial, points 12 to 20
13 to 23
Strength to Weight: Bending, points 13 to 19
20 to 30
Thermal Diffusivity, mm2/s 53
86
Thermal Shock Resistance, points 14 to 23
5.5 to 9.9

Alloy Composition

Aluminum (Al), % 0
97.8 to 99.3
Beryllium (Be), % 0.35 to 0.8
0
Chromium (Cr), % 0
0 to 0.050
Cobalt (Co), % 0 to 0.3
0
Copper (Cu), % 97.4 to 98.7
0 to 0.15
Iron (Fe), % 0
0.1 to 0.3
Magnesium (Mg), % 0
0.25 to 0.45
Manganese (Mn), % 0
0.020 to 0.15
Nickel (Ni), % 1.0 to 2.0
0
Silicon (Si), % 0
0.35 to 0.8
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15