MakeItFrom.com
Menu (ESC)

C82200 Copper vs. 707.0 Aluminum

C82200 copper belongs to the copper alloys classification, while 707.0 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C82200 copper and the bottom bar is 707.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
70
Elongation at Break, % 8.0 to 20
1.7 to 3.4
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 44
26
Tensile Strength: Ultimate (UTS), MPa 390 to 660
270 to 300
Tensile Strength: Yield (Proof), MPa 210 to 520
170 to 250

Thermal Properties

Latent Heat of Fusion, J/g 220
380
Maximum Temperature: Mechanical, °C 230
180
Melting Completion (Liquidus), °C 1080
630
Melting Onset (Solidus), °C 1040
600
Specific Heat Capacity, J/kg-K 390
880
Thermal Conductivity, W/m-K 180
150
Thermal Expansion, µm/m-K 17
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 45
37
Electrical Conductivity: Equal Weight (Specific), % IACS 46
110

Otherwise Unclassified Properties

Base Metal Price, % relative 55
9.5
Density, g/cm3 8.9
2.9
Embodied Carbon, kg CO2/kg material 4.8
8.3
Embodied Energy, MJ/kg 74
150
Embodied Water, L/kg 310
1140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 49 to 66
4.3 to 8.6
Resilience: Unit (Modulus of Resilience), kJ/m3 180 to 1130
210 to 430
Stiffness to Weight: Axial, points 7.4
13
Stiffness to Weight: Bending, points 18
47
Strength to Weight: Axial, points 12 to 20
26 to 29
Strength to Weight: Bending, points 13 to 19
32 to 34
Thermal Diffusivity, mm2/s 53
58
Thermal Shock Resistance, points 14 to 23
12 to 13

Alloy Composition

Aluminum (Al), % 0
90.5 to 93.6
Beryllium (Be), % 0.35 to 0.8
0
Chromium (Cr), % 0
0.2 to 0.4
Cobalt (Co), % 0 to 0.3
0
Copper (Cu), % 97.4 to 98.7
0 to 0.2
Iron (Fe), % 0
0 to 0.8
Magnesium (Mg), % 0
1.8 to 2.4
Manganese (Mn), % 0
0.4 to 0.6
Nickel (Ni), % 1.0 to 2.0
0
Silicon (Si), % 0
0 to 0.2
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
4.0 to 4.5
Residuals, % 0
0 to 0.15

Comparable Variants