MakeItFrom.com
Menu (ESC)

C82400 Copper vs. 206.0 Aluminum

C82400 copper belongs to the copper alloys classification, while 206.0 aluminum belongs to the aluminum alloys. There are 27 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C82400 copper and the bottom bar is 206.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
71
Elongation at Break, % 1.0 to 20
8.4 to 12
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 45
27
Tensile Strength: Ultimate (UTS), MPa 500 to 1030
330 to 440
Tensile Strength: Yield (Proof), MPa 260 to 970
190 to 350

Thermal Properties

Latent Heat of Fusion, J/g 230
390
Maximum Temperature: Mechanical, °C 270
170
Melting Completion (Liquidus), °C 1000
650
Melting Onset (Solidus), °C 900
570
Specific Heat Capacity, J/kg-K 380
880
Thermal Conductivity, W/m-K 130
120
Thermal Expansion, µm/m-K 17
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
33
Electrical Conductivity: Equal Weight (Specific), % IACS 26
99

Otherwise Unclassified Properties

Density, g/cm3 8.8
3.0
Embodied Carbon, kg CO2/kg material 8.9
8.0
Embodied Energy, MJ/kg 140
150
Embodied Water, L/kg 310
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 10 to 83
24 to 49
Resilience: Unit (Modulus of Resilience), kJ/m3 270 to 3870
270 to 840
Stiffness to Weight: Axial, points 7.6
13
Stiffness to Weight: Bending, points 19
46
Strength to Weight: Axial, points 16 to 33
30 to 40
Strength to Weight: Bending, points 16 to 26
35 to 42
Thermal Diffusivity, mm2/s 39
46
Thermal Shock Resistance, points 17 to 36
17 to 23

Alloy Composition

Aluminum (Al), % 0 to 0.15
93.3 to 95.3
Beryllium (Be), % 1.6 to 1.9
0
Chromium (Cr), % 0 to 0.1
0
Cobalt (Co), % 0.2 to 0.65
0
Copper (Cu), % 96 to 98.2
4.2 to 5.0
Iron (Fe), % 0 to 0.2
0 to 0.15
Lead (Pb), % 0 to 0.020
0
Magnesium (Mg), % 0
0.15 to 0.35
Manganese (Mn), % 0
0.2 to 0.5
Nickel (Ni), % 0 to 0.2
0 to 0.050
Silicon (Si), % 0
0 to 0.1
Tin (Sn), % 0 to 0.1
0 to 0.050
Titanium (Ti), % 0 to 0.12
0.15 to 0.3
Zinc (Zn), % 0 to 0.1
0 to 0.1
Residuals, % 0
0 to 0.15