MakeItFrom.com
Menu (ESC)

C82400 Copper vs. 6101 Aluminum

C82400 copper belongs to the copper alloys classification, while 6101 aluminum belongs to the aluminum alloys. There are 20 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C82400 copper and the bottom bar is 6101 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
68
Elongation at Break, % 1.0 to 20
10 to 25
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 45
26

Thermal Properties

Latent Heat of Fusion, J/g 230
400
Maximum Temperature: Mechanical, °C 270
160
Melting Completion (Liquidus), °C 1000
650
Melting Onset (Solidus), °C 900
620
Specific Heat Capacity, J/kg-K 380
900
Thermal Conductivity, W/m-K 130
220 to 230
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
57 to 60
Electrical Conductivity: Equal Weight (Specific), % IACS 26
190 to 200

Otherwise Unclassified Properties

Density, g/cm3 8.8
2.7
Embodied Carbon, kg CO2/kg material 8.9
8.3
Embodied Energy, MJ/kg 140
150
Embodied Water, L/kg 310
1190

Common Calculations

Stiffness to Weight: Axial, points 7.6
14
Stiffness to Weight: Bending, points 19
50
Thermal Diffusivity, mm2/s 39
89 to 93

Alloy Composition

Aluminum (Al), % 0 to 0.15
97.6 to 99.4
Beryllium (Be), % 1.6 to 1.9
0
Boron (B), % 0
0 to 0.060
Chromium (Cr), % 0 to 0.1
0 to 0.030
Cobalt (Co), % 0.2 to 0.65
0
Copper (Cu), % 96 to 98.2
0 to 0.1
Iron (Fe), % 0 to 0.2
0 to 0.5
Lead (Pb), % 0 to 0.020
0
Magnesium (Mg), % 0
0.35 to 0.8
Manganese (Mn), % 0
0 to 0.030
Nickel (Ni), % 0 to 0.2
0
Silicon (Si), % 0
0.3 to 0.7
Tin (Sn), % 0 to 0.1
0
Titanium (Ti), % 0 to 0.12
0
Zinc (Zn), % 0 to 0.1
0 to 0.1
Residuals, % 0
0 to 0.1