MakeItFrom.com
Menu (ESC)

N06058 Nickel vs. 5254 Aluminum

N06058 nickel belongs to the nickel alloys classification, while 5254 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is N06058 nickel and the bottom bar is 5254 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 220
68
Elongation at Break, % 45
3.4 to 22
Fatigue Strength, MPa 350
110 to 160
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 86
26
Shear Strength, MPa 600
150 to 200
Tensile Strength: Ultimate (UTS), MPa 860
240 to 350
Tensile Strength: Yield (Proof), MPa 410
100 to 270

Thermal Properties

Latent Heat of Fusion, J/g 330
400
Maximum Temperature: Mechanical, °C 980
190
Melting Completion (Liquidus), °C 1540
640
Melting Onset (Solidus), °C 1490
590
Specific Heat Capacity, J/kg-K 420
900
Thermal Conductivity, W/m-K 9.8
130
Thermal Expansion, µm/m-K 12
24

Otherwise Unclassified Properties

Base Metal Price, % relative 70
9.5
Density, g/cm3 8.8
2.7
Embodied Carbon, kg CO2/kg material 13
8.8
Embodied Energy, MJ/kg 170
150
Embodied Water, L/kg 310
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 320
11 to 41
Resilience: Unit (Modulus of Resilience), kJ/m3 370
73 to 550
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 23
51
Strength to Weight: Axial, points 27
25 to 37
Strength to Weight: Bending, points 23
32 to 41
Thermal Diffusivity, mm2/s 2.6
52
Thermal Shock Resistance, points 23
10 to 16

Alloy Composition

Aluminum (Al), % 0 to 0.4
94.4 to 96.8
Carbon (C), % 0 to 0.010
0
Chromium (Cr), % 20 to 23
0.15 to 0.35
Cobalt (Co), % 0 to 0.3
0
Copper (Cu), % 0 to 0.5
0 to 0.050
Iron (Fe), % 0 to 1.5
0 to 0.45
Magnesium (Mg), % 0
3.1 to 3.9
Manganese (Mn), % 0 to 0.5
0 to 0.010
Molybdenum (Mo), % 19 to 21
0
Nickel (Ni), % 52.2 to 61
0
Nitrogen (N), % 0.020 to 0.15
0
Phosphorus (P), % 0 to 0.015
0
Silicon (Si), % 0 to 0.1
0 to 0.45
Sulfur (S), % 0 to 0.010
0
Titanium (Ti), % 0
0 to 0.050
Tungsten (W), % 0 to 0.3
0
Zinc (Zn), % 0
0 to 0.2
Residuals, % 0
0 to 0.15