N07041 Nickel vs. 5019 Aluminum
N07041 nickel belongs to the nickel alloys classification, while 5019 aluminum belongs to the aluminum alloys. There are 19 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is N07041 nickel and the bottom bar is 5019 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 220 | |
68 |
Elongation at Break, % | 14 | |
2.2 to 18 |
Fatigue Strength, MPa | 540 | |
100 to 160 |
Shear Strength, MPa | 850 | |
170 to 210 |
Tensile Strength: Ultimate (UTS), MPa | 1400 | |
280 to 360 |
Tensile Strength: Yield (Proof), MPa | 1050 | |
120 to 300 |
Thermal Properties
Melting Onset (Solidus), °C | 1320 | |
540 |
Specific Heat Capacity, J/kg-K | 450 | |
900 |
Thermal Conductivity, W/m-K | 11 | |
130 |
Thermal Expansion, µm/m-K | 12 | |
24 |
Otherwise Unclassified Properties
Density, g/cm3 | 8.2 | |
2.7 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 180 | |
7.6 to 40 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 2510 | |
110 to 650 |
Stiffness to Weight: Axial, points | 15 | |
14 |
Stiffness to Weight: Bending, points | 25 | |
51 |
Strength to Weight: Axial, points | 47 | |
29 to 38 |
Strength to Weight: Bending, points | 34 | |
35 to 42 |
Thermal Diffusivity, mm2/s | 3.0 | |
52 |
Thermal Shock Resistance, points | 38 | |
13 to 16 |