MakeItFrom.com
Menu (ESC)

N08330 Stainless Steel vs. 5052 Aluminum

N08330 stainless steel belongs to the iron alloys classification, while 5052 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is N08330 stainless steel and the bottom bar is 5052 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180
46 to 83
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 34
1.1 to 22
Fatigue Strength, MPa 190
66 to 140
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 360
120 to 180
Tensile Strength: Ultimate (UTS), MPa 550
190 to 320
Tensile Strength: Yield (Proof), MPa 230
75 to 280

Thermal Properties

Latent Heat of Fusion, J/g 310
400
Maximum Temperature: Mechanical, °C 1050
190
Melting Completion (Liquidus), °C 1390
650
Melting Onset (Solidus), °C 1340
610
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 12
140
Thermal Expansion, µm/m-K 16
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
35
Electrical Conductivity: Equal Weight (Specific), % IACS 1.9
120

Otherwise Unclassified Properties

Base Metal Price, % relative 32
9.5
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 5.4
8.6
Embodied Energy, MJ/kg 77
150
Embodied Water, L/kg 190
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 150
1.7 to 69
Resilience: Unit (Modulus of Resilience), kJ/m3 140
41 to 590
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 19
19 to 33
Strength to Weight: Bending, points 18
27 to 38
Thermal Diffusivity, mm2/s 3.1
57
Thermal Shock Resistance, points 13
8.3 to 14

Alloy Composition

Aluminum (Al), % 0
95.8 to 97.7
Carbon (C), % 0 to 0.080
0
Chromium (Cr), % 17 to 20
0.15 to 0.35
Copper (Cu), % 0 to 1.0
0 to 0.1
Iron (Fe), % 38.3 to 48.3
0 to 0.4
Lead (Pb), % 0 to 0.0050
0
Magnesium (Mg), % 0
2.2 to 2.8
Manganese (Mn), % 0 to 2.0
0 to 0.1
Nickel (Ni), % 34 to 37
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0.75 to 1.5
0 to 0.25
Sulfur (S), % 0 to 0.030
0
Tin (Sn), % 0 to 0.025
0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15