MakeItFrom.com
Menu (ESC)

R30075 Cobalt vs. SAE-AISI T6 Steel

R30075 cobalt belongs to the cobalt alloys classification, while SAE-AISI T6 steel belongs to the iron alloys. There are 20 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.

For each property being compared, the top bar is R30075 cobalt and the bottom bar is SAE-AISI T6 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 210 to 250
210
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 82 to 98
81
Tensile Strength: Ultimate (UTS), MPa 780 to 1280
880 to 2150

Thermal Properties

Latent Heat of Fusion, J/g 320
250
Melting Completion (Liquidus), °C 1360
1830
Melting Onset (Solidus), °C 1290
1770
Specific Heat Capacity, J/kg-K 450
400
Thermal Conductivity, W/m-K 13
18
Thermal Expansion, µm/m-K 12
12

Otherwise Unclassified Properties

Density, g/cm3 8.4
9.5
Embodied Carbon, kg CO2/kg material 8.1
11
Embodied Energy, MJ/kg 110
170
Embodied Water, L/kg 530
160

Common Calculations

Stiffness to Weight: Axial, points 14 to 17
12
Stiffness to Weight: Bending, points 24 to 25
21
Strength to Weight: Axial, points 26 to 42
26 to 63
Strength to Weight: Bending, points 22 to 31
21 to 39
Thermal Diffusivity, mm2/s 3.5
4.7
Thermal Shock Resistance, points 21 to 29
26 to 64

Alloy Composition

Aluminum (Al), % 0 to 0.1
0
Boron (B), % 0 to 0.010
0
Carbon (C), % 0 to 0.35
0.75 to 0.85
Chromium (Cr), % 27 to 30
4.0 to 4.8
Cobalt (Co), % 58.7 to 68
11 to 13
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 0 to 0.75
55.9 to 63.5
Manganese (Mn), % 0 to 1.0
0.2 to 0.4
Molybdenum (Mo), % 5.0 to 7.0
0.4 to 1.0
Nickel (Ni), % 0 to 0.5
0 to 0.3
Nitrogen (N), % 0 to 0.25
0
Phosphorus (P), % 0 to 0.020
0 to 0.030
Silicon (Si), % 0 to 1.0
0.2 to 0.4
Sulfur (S), % 0 to 0.010
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Tungsten (W), % 0 to 0.2
18.5 to 21
Vanadium (V), % 0
1.5 to 2.1

Comparable Variants