MakeItFrom.com
Menu (ESC)

R60802 Alloy vs. Class 3 Tungsten

Both R60802 alloy and class 3 tungsten are otherwise unclassified metals. There are 20 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is R60802 alloy and the bottom bar is class 3 tungsten.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 98
270
Elongation at Break, % 22
3.4
Poisson's Ratio 0.34
0.28
Shear Modulus, GPa 36
100
Tensile Strength: Ultimate (UTS), MPa 430
830
Tensile Strength: Yield (Proof), MPa 270
580

Thermal Properties

Latent Heat of Fusion, J/g 250
170
Specific Heat Capacity, J/kg-K 270
120
Thermal Conductivity, W/m-K 22
30
Thermal Expansion, µm/m-K 6.0
4.5

Otherwise Unclassified Properties

Density, g/cm3 6.5
15
Embodied Water, L/kg 290
150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 85
25
Resilience: Unit (Modulus of Resilience), kJ/m3 380
630
Stiffness to Weight: Axial, points 8.3
9.6
Stiffness to Weight: Bending, points 23
14
Strength to Weight: Axial, points 18
15
Strength to Weight: Bending, points 19
13
Thermal Diffusivity, mm2/s 12
15
Thermal Shock Resistance, points 53
49

Alloy Composition

Chromium (Cr), % 0.050 to 0.15
0
Iron (Fe), % 0.070 to 0.2
0
Nickel (Ni), % 0.030 to 0.080
0
Tin (Sn), % 1.2 to 1.7
0
Tungsten (W), % 0
95
Zirconium (Zr), % 97.8 to 98.7
0
Residuals, % 0
5.0