MakeItFrom.com
Menu (ESC)

R60901 Alloy vs. 332.0 Aluminum

R60901 alloy belongs to the otherwise unclassified metals classification, while 332.0 aluminum belongs to the aluminum alloys. There are 20 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is R60901 alloy and the bottom bar is 332.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 98
73
Elongation at Break, % 17 to 22
1.0
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 37
27
Tensile Strength: Ultimate (UTS), MPa 500 to 580
250
Tensile Strength: Yield (Proof), MPa 350 to 390
190

Thermal Properties

Latent Heat of Fusion, J/g 250
530
Specific Heat Capacity, J/kg-K 270
880
Thermal Conductivity, W/m-K 17
100
Thermal Expansion, µm/m-K 6.3
21

Otherwise Unclassified Properties

Density, g/cm3 6.6
2.8
Embodied Water, L/kg 270
1040

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 88 to 100
2.3
Resilience: Unit (Modulus of Resilience), kJ/m3 640 to 760
250
Stiffness to Weight: Axial, points 8.3
15
Stiffness to Weight: Bending, points 23
50
Strength to Weight: Axial, points 21 to 25
24
Strength to Weight: Bending, points 21 to 24
31
Thermal Diffusivity, mm2/s 9.7
42
Thermal Shock Resistance, points 58 to 67
12

Alloy Composition

Aluminum (Al), % 0
80.1 to 89
Copper (Cu), % 0
2.0 to 4.0
Iron (Fe), % 0
0 to 1.2
Magnesium (Mg), % 0
0.5 to 1.5
Manganese (Mn), % 0
0 to 0.5
Nickel (Ni), % 0
0 to 0.5
Niobium (Nb), % 2.4 to 2.8
0
Silicon (Si), % 0
8.5 to 10.5
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 1.0
Zirconium (Zr), % 96.8 to 97.5
0
Residuals, % 0
0 to 0.5