MakeItFrom.com
Menu (ESC)

S17700 Stainless Steel vs. 4006 Aluminum

S17700 stainless steel belongs to the iron alloys classification, while 4006 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S17700 stainless steel and the bottom bar is 4006 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180 to 430
28 to 45
Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 1.0 to 23
3.4 to 24
Fatigue Strength, MPa 290 to 560
35 to 110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 740 to 940
70 to 91
Tensile Strength: Ultimate (UTS), MPa 1180 to 1650
110 to 160
Tensile Strength: Yield (Proof), MPa 430 to 1210
62 to 140

Thermal Properties

Latent Heat of Fusion, J/g 290
410
Maximum Temperature: Mechanical, °C 890
160
Melting Completion (Liquidus), °C 1440
640
Melting Onset (Solidus), °C 1400
620
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
220
Thermal Expansion, µm/m-K 11
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.3
56
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
180

Otherwise Unclassified Properties

Base Metal Price, % relative 13
9.0
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.8
8.1
Embodied Energy, MJ/kg 40
150
Embodied Water, L/kg 150
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 15 to 210
5.1 to 26
Resilience: Unit (Modulus of Resilience), kJ/m3 460 to 3750
28 to 130
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 42 to 59
11 to 16
Strength to Weight: Bending, points 32 to 40
19 to 24
Thermal Diffusivity, mm2/s 4.1
89
Thermal Shock Resistance, points 39 to 54
4.9 to 7.0

Alloy Composition

Aluminum (Al), % 0.75 to 1.5
97.4 to 98.7
Carbon (C), % 0 to 0.090
0
Chromium (Cr), % 16 to 18
0 to 0.2
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 70.5 to 76.8
0.5 to 0.8
Magnesium (Mg), % 0
0 to 0.010
Manganese (Mn), % 0 to 1.0
0 to 0.050
Nickel (Ni), % 6.5 to 7.8
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0.8 to 1.2
Sulfur (S), % 0 to 0.030
0
Zinc (Zn), % 0
0 to 0.050
Residuals, % 0
0 to 0.15

Comparable Variants