S17700 Stainless Steel vs. 7005 Aluminum
S17700 stainless steel belongs to the iron alloys classification, while 7005 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is S17700 stainless steel and the bottom bar is 7005 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 200 | |
70 |
Elongation at Break, % | 1.0 to 23 | |
10 to 20 |
Fatigue Strength, MPa | 290 to 560 | |
100 to 190 |
Poisson's Ratio | 0.28 | |
0.33 |
Shear Modulus, GPa | 76 | |
26 |
Shear Strength, MPa | 740 to 940 | |
120 to 230 |
Tensile Strength: Ultimate (UTS), MPa | 1180 to 1650 | |
200 to 400 |
Tensile Strength: Yield (Proof), MPa | 430 to 1210 | |
95 to 350 |
Thermal Properties
Latent Heat of Fusion, J/g | 290 | |
380 |
Maximum Temperature: Mechanical, °C | 890 | |
200 |
Melting Completion (Liquidus), °C | 1440 | |
640 |
Melting Onset (Solidus), °C | 1400 | |
610 |
Specific Heat Capacity, J/kg-K | 480 | |
880 |
Thermal Conductivity, W/m-K | 15 | |
140 to 170 |
Thermal Expansion, µm/m-K | 11 | |
23 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 2.3 | |
35 to 43 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 2.7 | |
110 to 130 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 13 | |
9.5 |
Density, g/cm3 | 7.7 | |
2.9 |
Embodied Carbon, kg CO2/kg material | 2.8 | |
8.3 |
Embodied Energy, MJ/kg | 40 | |
150 |
Embodied Water, L/kg | 150 | |
1150 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 15 to 210 | |
32 to 57 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 460 to 3750 | |
65 to 850 |
Stiffness to Weight: Axial, points | 14 | |
13 |
Stiffness to Weight: Bending, points | 25 | |
47 |
Strength to Weight: Axial, points | 42 to 59 | |
19 to 38 |
Strength to Weight: Bending, points | 32 to 40 | |
26 to 41 |
Thermal Diffusivity, mm2/s | 4.1 | |
54 to 65 |
Thermal Shock Resistance, points | 39 to 54 | |
8.7 to 18 |
Alloy Composition
Aluminum (Al), % | 0.75 to 1.5 | |
91 to 94.7 |
Carbon (C), % | 0 to 0.090 | |
0 |
Chromium (Cr), % | 16 to 18 | |
0.060 to 0.2 |
Copper (Cu), % | 0 | |
0 to 0.1 |
Iron (Fe), % | 70.5 to 76.8 | |
0 to 0.4 |
Magnesium (Mg), % | 0 | |
1.0 to 1.8 |
Manganese (Mn), % | 0 to 1.0 | |
0.2 to 0.7 |
Nickel (Ni), % | 6.5 to 7.8 | |
0 |
Phosphorus (P), % | 0 to 0.040 | |
0 |
Silicon (Si), % | 0 to 1.0 | |
0 to 0.35 |
Sulfur (S), % | 0 to 0.030 | |
0 |
Titanium (Ti), % | 0 | |
0.010 to 0.060 |
Zinc (Zn), % | 0 | |
4.0 to 5.0 |
Zirconium (Zr), % | 0 | |
0.080 to 0.2 |
Residuals, % | 0 | |
0 to 0.15 |