MakeItFrom.com
Menu (ESC)

S20431 Stainless Steel vs. 380.0 Aluminum

S20431 stainless steel belongs to the iron alloys classification, while 380.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S20431 stainless steel and the bottom bar is 380.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 210
80
Elastic (Young's, Tensile) Modulus, GPa 200
74
Elongation at Break, % 46
3.0
Fatigue Strength, MPa 320
140
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
28
Shear Strength, MPa 500
190
Tensile Strength: Ultimate (UTS), MPa 710
320
Tensile Strength: Yield (Proof), MPa 350
160

Thermal Properties

Latent Heat of Fusion, J/g 280
510
Maximum Temperature: Mechanical, °C 890
170
Melting Completion (Liquidus), °C 1400
590
Melting Onset (Solidus), °C 1360
540
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 15
100
Thermal Expansion, µm/m-K 17
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
27
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
83

Otherwise Unclassified Properties

Base Metal Price, % relative 12
10
Density, g/cm3 7.7
2.9
Embodied Carbon, kg CO2/kg material 2.5
7.5
Embodied Energy, MJ/kg 36
140
Embodied Water, L/kg 140
1040

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 270
8.0
Resilience: Unit (Modulus of Resilience), kJ/m3 310
170
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
48
Strength to Weight: Axial, points 25
31
Strength to Weight: Bending, points 23
36
Thermal Diffusivity, mm2/s 4.0
40
Thermal Shock Resistance, points 15
14

Alloy Composition

Aluminum (Al), % 0
79.6 to 89.5
Carbon (C), % 0 to 0.12
0
Chromium (Cr), % 17 to 18
0
Copper (Cu), % 1.5 to 3.5
3.0 to 4.0
Iron (Fe), % 66.1 to 74.4
0 to 2.0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 5.0 to 7.0
0 to 0.5
Nickel (Ni), % 2.0 to 4.0
0 to 0.5
Nitrogen (N), % 0.1 to 0.25
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
7.5 to 9.5
Sulfur (S), % 0 to 0.030
0
Tin (Sn), % 0
0 to 0.35
Zinc (Zn), % 0
0 to 3.0
Residuals, % 0
0 to 0.5