MakeItFrom.com
Menu (ESC)

S20431 Stainless Steel vs. 5383 Aluminum

S20431 stainless steel belongs to the iron alloys classification, while 5383 aluminum belongs to the aluminum alloys. There are 32 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S20431 stainless steel and the bottom bar is 5383 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 210
85 to 110
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 46
6.7 to 15
Fatigue Strength, MPa 320
130 to 200
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 500
190 to 220
Tensile Strength: Ultimate (UTS), MPa 710
310 to 370
Tensile Strength: Yield (Proof), MPa 350
150 to 310

Thermal Properties

Latent Heat of Fusion, J/g 280
390
Maximum Temperature: Corrosion, °C 410
65
Maximum Temperature: Mechanical, °C 890
200
Melting Completion (Liquidus), °C 1400
650
Melting Onset (Solidus), °C 1360
540
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
130
Thermal Expansion, µm/m-K 17
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
29
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
97

Otherwise Unclassified Properties

Base Metal Price, % relative 12
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.5
9.0
Embodied Energy, MJ/kg 36
160
Embodied Water, L/kg 140
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 270
23 to 40
Resilience: Unit (Modulus of Resilience), kJ/m3 310
170 to 690
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 25
32 to 38
Strength to Weight: Bending, points 23
38 to 42
Thermal Diffusivity, mm2/s 4.0
51
Thermal Shock Resistance, points 15
14 to 16

Alloy Composition

Aluminum (Al), % 0
92 to 95.3
Carbon (C), % 0 to 0.12
0
Chromium (Cr), % 17 to 18
0 to 0.25
Copper (Cu), % 1.5 to 3.5
0 to 0.2
Iron (Fe), % 66.1 to 74.4
0 to 0.25
Magnesium (Mg), % 0
4.0 to 5.2
Manganese (Mn), % 5.0 to 7.0
0.7 to 1.0
Nickel (Ni), % 2.0 to 4.0
0
Nitrogen (N), % 0.1 to 0.25
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0 to 0.25
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.4
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15