MakeItFrom.com
Menu (ESC)

S20910 Stainless Steel vs. 7129 Aluminum

S20910 stainless steel belongs to the iron alloys classification, while 7129 Aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S20910 stainless steel and the bottom bar is 7129 Aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 14 to 39
9.0 to 9.1
Fatigue Strength, MPa 310 to 460
150 to 190
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 79
26
Shear Strength, MPa 500 to 570
250 to 260
Tensile Strength: Ultimate (UTS), MPa 780 to 940
430
Tensile Strength: Yield (Proof), MPa 430 to 810
380 to 390

Thermal Properties

Latent Heat of Fusion, J/g 300
380
Maximum Temperature: Mechanical, °C 1080
180
Melting Completion (Liquidus), °C 1420
630
Melting Onset (Solidus), °C 1380
510
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 13
150
Thermal Expansion, µm/m-K 16
24

Otherwise Unclassified Properties

Base Metal Price, % relative 22
9.5
Density, g/cm3 7.8
2.9
Embodied Carbon, kg CO2/kg material 4.8
8.3
Embodied Energy, MJ/kg 68
150
Embodied Water, L/kg 180
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120 to 260
37 to 38
Resilience: Unit (Modulus of Resilience), kJ/m3 460 to 1640
1050 to 1090
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 28 to 33
41
Strength to Weight: Bending, points 24 to 27
43 to 44
Thermal Diffusivity, mm2/s 3.6
58
Thermal Shock Resistance, points 17 to 21
19

Alloy Composition

Aluminum (Al), % 0
91 to 94
Carbon (C), % 0 to 0.060
0
Chromium (Cr), % 20.5 to 23.5
0 to 0.1
Copper (Cu), % 0
0.5 to 0.9
Gallium (Ga), % 0
0 to 0.030
Iron (Fe), % 52.1 to 62.1
0 to 0.3
Magnesium (Mg), % 0
1.3 to 2.0
Manganese (Mn), % 4.0 to 6.0
0 to 0.1
Molybdenum (Mo), % 1.5 to 3.0
0
Nickel (Ni), % 11.5 to 13.5
0
Niobium (Nb), % 0.1 to 0.3
0
Nitrogen (N), % 0.2 to 0.4
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 0.75
0 to 0.15
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.050
Vanadium (V), % 0.1 to 0.3
0 to 0.050
Zinc (Zn), % 0
4.2 to 5.2
Residuals, % 0
0 to 0.15