MakeItFrom.com
Menu (ESC)

S44800 Stainless Steel vs. EN AC-43200 Aluminum

S44800 stainless steel belongs to the iron alloys classification, while EN AC-43200 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S44800 stainless steel and the bottom bar is EN AC-43200 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190
60 to 88
Elastic (Young's, Tensile) Modulus, GPa 210
72
Elongation at Break, % 23
1.1
Fatigue Strength, MPa 300
67
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 82
27
Tensile Strength: Ultimate (UTS), MPa 590
190 to 260
Tensile Strength: Yield (Proof), MPa 450
97 to 220

Thermal Properties

Latent Heat of Fusion, J/g 300
540
Maximum Temperature: Mechanical, °C 1100
170
Melting Completion (Liquidus), °C 1460
600
Melting Onset (Solidus), °C 1410
590
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 17
140
Thermal Expansion, µm/m-K 11
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.6
34
Electrical Conductivity: Equal Weight (Specific), % IACS 3.0
120

Otherwise Unclassified Properties

Base Metal Price, % relative 19
9.5
Density, g/cm3 7.8
2.6
Embodied Carbon, kg CO2/kg material 3.8
7.8
Embodied Energy, MJ/kg 52
150
Embodied Water, L/kg 190
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120
1.8 to 2.7
Resilience: Unit (Modulus of Resilience), kJ/m3 480
66 to 330
Stiffness to Weight: Axial, points 15
15
Stiffness to Weight: Bending, points 25
54
Strength to Weight: Axial, points 21
20 to 28
Strength to Weight: Bending, points 20
28 to 35
Thermal Diffusivity, mm2/s 4.6
59
Thermal Shock Resistance, points 19
8.8 to 12

Alloy Composition

Aluminum (Al), % 0
86.1 to 90.8
Carbon (C), % 0 to 0.010
0
Chromium (Cr), % 28 to 30
0
Copper (Cu), % 0 to 0.15
0 to 0.35
Iron (Fe), % 62.6 to 66.5
0 to 0.65
Lead (Pb), % 0
0 to 0.1
Magnesium (Mg), % 0
0.2 to 0.45
Manganese (Mn), % 0 to 0.3
0 to 0.55
Molybdenum (Mo), % 3.5 to 4.2
0
Nickel (Ni), % 2.0 to 2.5
0 to 0.15
Nitrogen (N), % 0 to 0.020
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.2
9.0 to 11
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15