MakeItFrom.com
Menu (ESC)

S64512 Stainless Steel vs. 6060 Aluminum

S64512 stainless steel belongs to the iron alloys classification, while 6060 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S64512 stainless steel and the bottom bar is 6060 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 17
9.0 to 16
Fatigue Strength, MPa 540
37 to 70
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 700
86 to 130
Tensile Strength: Ultimate (UTS), MPa 1140
140 to 220
Tensile Strength: Yield (Proof), MPa 890
71 to 170

Thermal Properties

Latent Heat of Fusion, J/g 270
400
Maximum Temperature: Mechanical, °C 750
160
Melting Completion (Liquidus), °C 1460
660
Melting Onset (Solidus), °C 1420
610
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 28
210
Thermal Expansion, µm/m-K 10
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 3.6
54
Electrical Conductivity: Equal Weight (Specific), % IACS 4.1
180

Otherwise Unclassified Properties

Base Metal Price, % relative 10
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.3
8.3
Embodied Energy, MJ/kg 47
150
Embodied Water, L/kg 110
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
13 to 24
Resilience: Unit (Modulus of Resilience), kJ/m3 2020
37 to 210
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 40
14 to 23
Strength to Weight: Bending, points 31
22 to 30
Thermal Diffusivity, mm2/s 7.5
85
Thermal Shock Resistance, points 42
6.3 to 9.9

Alloy Composition

Aluminum (Al), % 0
97.9 to 99.3
Carbon (C), % 0.080 to 0.15
0
Chromium (Cr), % 11 to 12.5
0 to 0.050
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 80.6 to 84.7
0.1 to 0.3
Magnesium (Mg), % 0
0.35 to 0.6
Manganese (Mn), % 0.5 to 0.9
0 to 0.1
Molybdenum (Mo), % 1.5 to 2.0
0
Nickel (Ni), % 2.0 to 3.0
0
Nitrogen (N), % 0.010 to 0.050
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.35
0.3 to 0.6
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.1
Vanadium (V), % 0.25 to 0.4
0
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.15