MakeItFrom.com
Menu (ESC)

S64512 Stainless Steel vs. 6070 Aluminum

S64512 stainless steel belongs to the iron alloys classification, while 6070 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S64512 stainless steel and the bottom bar is 6070 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 17
5.6 to 8.6
Fatigue Strength, MPa 540
95 to 130
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 700
220 to 240
Tensile Strength: Ultimate (UTS), MPa 1140
370 to 380
Tensile Strength: Yield (Proof), MPa 890
350

Thermal Properties

Latent Heat of Fusion, J/g 270
410
Maximum Temperature: Mechanical, °C 750
160
Melting Completion (Liquidus), °C 1460
650
Melting Onset (Solidus), °C 1420
570
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 28
160
Thermal Expansion, µm/m-K 10
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 3.6
41
Electrical Conductivity: Equal Weight (Specific), % IACS 4.1
140

Otherwise Unclassified Properties

Base Metal Price, % relative 10
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.3
8.3
Embodied Energy, MJ/kg 47
150
Embodied Water, L/kg 110
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
20 to 32
Resilience: Unit (Modulus of Resilience), kJ/m3 2020
880 to 900
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 40
38
Strength to Weight: Bending, points 31
42 to 43
Thermal Diffusivity, mm2/s 7.5
65
Thermal Shock Resistance, points 42
16 to 17

Alloy Composition

Aluminum (Al), % 0
94.6 to 98
Carbon (C), % 0.080 to 0.15
0
Chromium (Cr), % 11 to 12.5
0 to 0.1
Copper (Cu), % 0
0.15 to 0.4
Iron (Fe), % 80.6 to 84.7
0 to 0.5
Magnesium (Mg), % 0
0.5 to 1.2
Manganese (Mn), % 0.5 to 0.9
0.4 to 1.0
Molybdenum (Mo), % 1.5 to 2.0
0
Nickel (Ni), % 2.0 to 3.0
0
Nitrogen (N), % 0.010 to 0.050
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.35
1.0 to 1.7
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.15
Vanadium (V), % 0.25 to 0.4
0
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15