MakeItFrom.com
Menu (ESC)

S82441 Stainless Steel vs. 6005 Aluminum

S82441 stainless steel belongs to the iron alloys classification, while 6005 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S82441 stainless steel and the bottom bar is 6005 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 250
90 to 95
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 28
9.5 to 17
Fatigue Strength, MPa 400
55 to 95
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 79
26
Shear Strength, MPa 490
120 to 210
Tensile Strength: Ultimate (UTS), MPa 760
190 to 310
Tensile Strength: Yield (Proof), MPa 550
100 to 280

Thermal Properties

Latent Heat of Fusion, J/g 290
410
Maximum Temperature: Mechanical, °C 1090
160
Melting Completion (Liquidus), °C 1430
650
Melting Onset (Solidus), °C 1380
610
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
180 to 200
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
54
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
180

Otherwise Unclassified Properties

Base Metal Price, % relative 16
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 3.2
8.3
Embodied Energy, MJ/kg 45
150
Embodied Water, L/kg 170
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 190
27 to 36
Resilience: Unit (Modulus of Resilience), kJ/m3 740
77 to 550
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 27
20 to 32
Strength to Weight: Bending, points 24
28 to 38
Thermal Diffusivity, mm2/s 3.9
74 to 83
Thermal Shock Resistance, points 21
8.6 to 14

Alloy Composition

Aluminum (Al), % 0
97.5 to 99
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 23 to 25
0 to 0.1
Copper (Cu), % 0.1 to 0.8
0 to 0.1
Iron (Fe), % 62.6 to 70.2
0 to 0.35
Magnesium (Mg), % 0
0.4 to 0.6
Manganese (Mn), % 2.5 to 4.0
0 to 0.1
Molybdenum (Mo), % 1.0 to 2.0
0
Nickel (Ni), % 3.0 to 4.5
0
Nitrogen (N), % 0.2 to 0.3
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 0.7
0.6 to 0.9
Sulfur (S), % 0 to 0.0050
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15